Flip Your Sunglasses Into a Hidden Spy Camera!

It is accurate. Even in case you are not an expert in electronics, you can turn your run - of - themill shades in to a hidden spy camera! And all for a very low cost, with minimal effort and understanding on your part, and with only a couple basic tools and parts. Here is how.

Things That You will Desire

You will need black shades, preferably the type that wraps around your eyes and can accommodate a mini camera on its facet. The darker the sunglasses, the better to conceal the hidden spy camera.

You will also require a mini spy camera, that you can get on the internet or from auction houses. If you can, secure a miniature traveler camera with color abilities and audio recording capacities. In this manner, you will have top quality video and audio footages.

You also need to choose a camcorder for saving the video and sound footages. Pick for a device that is suitable for easily into your own pocket. With a few kinds of camcorders, you may have to make use of cargo pants for its wide pockets.

You also need to buy 24 gauge black wire to go the wires on the concealed spy camera. Also purchase a 9-volt battery for its power source.

The tools necessary for this kind of doit-yourself job are your handy wire snips for cutting wires, your soldering gun to solder wires, shrink tube to shield the wire connections, and a hot glue gun to attach the spy camera to the shades. Then you are set to make your own home made hidden spy camera, in case you have all these and just a little patience.

Alter the Mini Traveler Camera

First, uncover the individual wiring in the camera by ripping off the protective one - wire casing. Using your cable snips, cut the exposed wires on the spy camera to about 3-4 inches from the camera it self. You should see 4 exposed wires - electricity, audio, video, and earth. All these should converge into three connectors just - power, sound and video - because the ground wire is connected to all three.

Get your black cable and reduce four measures of about 4 feet. Using your soldering gun, you may subsequently solder each length into the exposed spy camera cables. Next, you will need to add heat shrink tubing to shield the newest connections. You will then put finishing touches on your own ready-to-be-mounted hidden spy camera by soldering the other wire finishes to the proper connector end. Possible implement more decrease tubing as necessary to produce an all-black cable, which will combine to your black shades.

After thoroughly cleaning the shades, after that you can mount your altered miniature spy camera in the sunglasses' provide. Pick the side which fits you more comfortably.

You then link the video and audio wires of the mini traveler camera to your camcorder. Add the 9-volt battery to the power line and you are set to move. Just hide the wires inside your shirt and on to your pants pocket.

Love! You can now shoot video and sound footages with your homemade hidden spy camera! Envision the limitless possibilities of the gizmo. You need to be very cautious as integrity and regulations may be quite different from your own goal.

Do you need a hidden spy cam and yet be hip still? Then flip your sunglasses and also your mini spy camera into a hip hidden spy camera! Go to VideoSurveillance-Guide.com for more info on ways to realize this.

For More Info : http://ultimatespycamera.com