Spray On Bedliner
Spray on Bed Liner with a Low Cost Startup Ideal for Automotive applications, QWIK Liner is a permanently bonded a protective barrier between your vehicle and the outside environment
Available in full range of colors, the QWIK LINER® Spray-On Bed Liner is the best protection for your application needs. Industry proven and until now applied only with expensive equipment; the QWIK LINER® is the most economical solution to professional grade applications where an anti-skid, chemical resistant, abrasion proof lining is an absolute necessity.
Spray on Bed protecting with a Low Cost Start-up is ideal for Automobile programs, QWIK Protecting is definitely a protection barrier between vehicle and the outside environment, protecting your economical dedication from destruction, imperfections, scores, and material destruction. Unlike drop-in, that allows moisture and dust to get trapped below causing rust, dents, scratches, and chemical corrosion, QWIK LINER sets in a few minutes, shaping to every fold, nook and corner of car, truck for instant use. Improve the life of car and boost the NADA / Blue Book re-sale value with a real Label. The QWIK LINER® is 100% solids linings which are ideal for spray-on bedliners, 4x4's, restoration projects, trailers, containment area, flooring, industrial and marine applications. The QWIK LINER® system is an easy solution for sprayed-on bedliner repairs and coating jobs.
QWIK LINER® HYBRID Coat QWIK LINER® HYBRID Coat is a 100% solids, two component, polyurea hybrid coating. HYBRID Coat is primarily used for lining truck beds, van and SUV interiors or the repair of existing sprayed on bedliners. Other automotive uses include undercoating and rocker guard protection. HYBRID Coat also works well as a protective coating on utility trailers, horse and boat trailers. It contains no volatile organic compounds (VOC's).
QWIK LINER® Spray Gun Specifications • Air Cylinder: 4" Aluminum • Air Valve: Built In Base of Handle • Length: 21 11/16" • Mixing Tube: Length-11", Mixing Elements-24 • Cartridge Size: 750ml x 750ml (51.0 fl. oz.) • Ratio: 1:1 • Thrust Force: 1100 lbs. @ 100 PSI Click to Enlarge • Max Air Pressure: 110 PSI • Air Input Fitting: 1/4" Pipe Thread Female • Compressor Requirements: 10 CFM @ 90 PSI • Adjustable Air Regulator • Air Dump Valve Stops Flow Instantly • Reverse Air • Has your machine been down and you’ve lost revenue? • Have you needed to spray small items but not wanted to start up your high volume spray system? • Have you been called for mobile work but can’t easily transport your main system and will be left with nothing at your shop?
With the QWIK LINER® spray-on bedliner system you can start coating automotive, marine, industrial or commercial jobs today. The complete system includes all the equipment necessary to get your started. The equipment varies from the Spray Gun items used for your safely.
QWIK LINER 6630 Roxburgh Ave #175 Houston, TX -77041 Ph 1-888-421-5880 Fax 713-937-0065
Rate this! 1-5 starsSpray on Bed protecting with a Low Cost Start-up is ideal for Automobile programs, QWIK Protecting is definitely a protection barrier between vehicle and the outside environment, protecting your economical dedication from destruction, imperfections, scores, and material destruction. Unlike drop-in, that allows moisture and dust to get trapped below causing rust, dents, scratches, and chemical corrosion, QWIK LINER sets in a few minutes, shaping to every fold, nook and corner of car, truck for instant use. Improve the life of car and boost the NADA / Blue Book re-sale value with a real Label. The QWIK LINER® is 100% solids linings which are ideal for spray-on bedliners, 4x4's, restoration projects, trailers, containment area, flooring, industrial and marine applications. The QWIK LINER® system is an easy solution for sprayed-on bedliner repairs and coating jobs.
QWIK LINER® HYBRID Coat QWIK LINER® HYBRID Coat is a 100% solids, two component, polyurea hybrid coating. HYBRID Coat is primarily used for lining truck beds, van and SUV interiors or the repair of existing sprayed on bedliners. Other automotive uses include undercoating and rocker guard protection. HYBRID Coat also works well as a protective coating on utility trailers, horse and boat trailers. It contains no volatile organic compounds (VOC's).
QWIK LINER® Spray Gun Specifications • Air Cylinder: 4" Aluminum • Air Valve: Built In Base of Handle • Length: 21 11/16" • Mixing Tube: Length-11", Mixing Elements-24 • Cartridge Size: 750ml x 750ml (51.0 fl. oz.) • Ratio: 1:1 • Thrust Force: 1100 lbs. @ 100 PSI Click to Enlarge • Max Air Pressure: 110 PSI • Air Input Fitting: 1/4" Pipe Thread Female • Compressor Requirements: 10 CFM @ 90 PSI • Adjustable Air Regulator • Air Dump Valve Stops Flow Instantly • Reverse Air • Has your machine been down and you’ve lost revenue? • Have you needed to spray small items but not wanted to start up your high volume spray system? • Have you been called for mobile work but can’t easily transport your main system and will be left with nothing at your shop?
With the QWIK LINER® spray-on bedliner system you can start coating automotive, marine, industrial or commercial jobs today. The complete system includes all the equipment necessary to get your started. The equipment varies from the Spray Gun items used for your safely.
QWIK LINER 6630 Roxburgh Ave #175 Houston, TX -77041 Ph 1-888-421-5880 Fax 713-937-0065
Add a review
