Cabinet Hardware and the Power of Clean

The one thing you have to know is what easy breezy method to use on which of your cabinet knobs and cabinet pulls. Once again, fate is on your side, because we have the answers right here. Read on for kitchen cabinet hardware cleaning instructions that can be done in less than an hour.

Here is what to do. Using a damp, soapy cloth, rub the surface of these cabinet knobs and pulls until the dirt is removed. Extra tough build up might be harder to scrub off, so try a plastic scrub brush, an old toothbrush or any other brush with soft bristles. Just don't use anything metal, as it will scratch the finish and the pieces badly.

If you thought wood cabinet hardware was easy, you are going to love this next one. Plastic, metal and glass cabinet hardware are all super simple to clean. Soak the cabinet knobs, cabinet pulls and cabinet hinges in a mild soap and water solution for a few minutes. Use that toothbrush to loosen any tough particles of dirt. Rinse the pieces individually when finished, and polish dry with a soft, clean and lint-free cloth. Buff your glass hardware with newspaper for an added clarity and shine.

This untouched hardware, known as a living finish, ages with time to create a beautiful patina that people love. Such cabinet pulls and knobs have to be treated with care in order to prevent damaging or discoloring the hardware. Pewter cabinet hardware is particularly soft, so polish gently. Also, don't rub your bronze or pewter hardware too hard because you will remove the elegant coloring that it took so long to develop. A salted lemon slice can help clean copper, brass or bronze, and aluminum foil and water will bring that exhilarating shine back to chrome.

When selecting cabinet hardware for your kitchen or bath you should first determine if your cabinets have existing holes in them. If you have existing holes drilled you will need to make sure your new cabinet hardware will fit in the holes. For example if your cabinets are drilled for cabinet pulls you will need to measure the distance between the holes.

When selecting cabinet knobs and pulls you should take into account the size of your doors and drawers to make sure the hardware you choose will fit. Most cabinet hardware is packaged with a standard size screw. You should measure the thickness of your cabinets to make sure the screws in the package will work for your condition. If the screws are to long or short you can purchase screws separately at any home improvement store.

For More Information, Visit : http://www.selecthomehardware.com